基于Bootstrap方法的舰空导弹武器系统制导精度评定

针对靶场进行导弹武器系统制导精度评定试验样本少的问题,提出了一种通过仿真提高试验结果评估置信度的数据融合评估方法。对舰空导弹武器系统制导误差产生的原因、误差分布规律进行了分析,给出了基于Bootstrap的制导精度评定方法。     

C~4ISR系统结构时效性的仿真评估

时效性是评价C4ISR系统结构优劣的重要标准。为了支撑C4ISR系统结构的分析评估与优化设计,提出了系统结构时效性的评估指标体系和指标评估模型,基于Agent建模方法建立了情报获取、情报处理、决策控制和响应执行等系统结构单元的仿真模型,设计并实现了C4ISR系统结构仿真评估软件。开展了三类仿真实验,分析了影响系统结构时效性的因素,比较了不同类型系统结构的优劣,验证了此方法的有效性。     

基于虚拟现实技术的手榴弹投掷安全施训研究

分析了目前手榴弹投掷训练存在的一些问题和研究方法,模拟仿真了基于虚拟现实技术、N-vision平台、3dsMax以及JACK建立的手榴弹实弹投掷场景,再现优秀训练者的技术动作和细微环节、教练员的意图,采用交互漫游,增强了沉浸感,从而提高训练质量,降低安全隐患风险。     

小子样条件下战斗部爆炸仿真数据可信性分析

高效毁伤战斗部试验次数受到严格控制,如何在小子样条件下分析仿真数据的可信性非常有必要。通过均匀试验得到了战斗部在地下目标腔室内部爆炸某点冲击波最大超压峰值,利用normplot及Lilliefors函数分析了仿真数据的分布特征,而后在已有检验方法的基础上,结合顺序统计量和均匀分布的特点提出了一种新的相容性验证思路。研究表明:该方法不受样本容量的限制,利用MATLAB程序编程可以快速判断仿真数据的可信性。     

典型线性火工分离装置作用过程数值模拟及试验研究

针对目前线性火工分离装置的优化设计主要依靠试验验证,成本高且设计优化迭代慢的问题,采用任意拉格朗日-欧拉方法建立典型线性火工分离装置的数值模型。通过火工分离试验和光子多普勒测速试验对上述数值模型进行验证,发现该数值模型具有较好的精度。使用该模型研究上述火工分离装置分离瞬态过程的力学机理,并定量分析多种因素对分离装置重点部位等效塑性应变等关键特征量的影响。研究发现,芯药线密度、分离板削弱槽底部的圆角半径对分离装置的作用过程有重大影响。此外,保护罩材质、削弱槽开口角度、分离板槽结构尺寸等因素对分离过程也有一定影响,但其影响相对较小。研究结果可以为典型线性火工分离装置的优化设计提供基础。     

Data-driven prediction of plate velocities and plate deformation of explosive reactive armor

Explosive reactive armor (ERA) is currently being actively developed as a protective system for mobile devices against ballistic threats such as kinetic energy penetrators and shaped-charge jets. Considering mobility, the aim is to design a protection system with a minimal amount of required mass. The efficiency of an ERA is sensitive to the impact position and the timing of the detonation. Therefore, different designs have to be tested for several impact scenarios to identify the best design. Since analytical models are not predicting the behavior of the ERA accurately enough and experiments, as well as numerical simulations, are too time-consuming, a data-driven model to estimate the displacements and deformation of plates of an ERA system is proposed here. The ground truth for the artificial neural network (ANN) is numerical simulation results that are validated with experiments. The ANN approximates the plate positions for different materials, plate sizes, and detonation point positions with sufficient accuracy in real-time. In a future investigation, the results from the model can be used to estimate the interaction of the ERA with a given threat. Then, a measure for the effectiveness of an ERA can be calculated. Finally, an optimal ERA can be designed and analyzed for any possible impact scenario in negligible time.     

Microcrack- and microvoid-related impact damage and ignition responses for HMX-based polymer-bonded explosives at high temperature

Investigating the damage and ignition behaviors of polymer-bonded explosive (PBX) under a coupled impact and high-temperature loading condition is required for the safe use of charged PBXs. An improved combined microcrack and microvoid model (CMM) was developed for better describing the thermal effects of deformation, damage, and ignition responses of PBXs. The main features of the model under typical dynamic loadings (i.e. uniaxial tension and compression, and lateral confinement) at different initial temperature were first studied. And then the effects of temperature on impact-shear sensitivity of HMX-based PBXs were investigated. The results showed that the ignition threshold velocity of shear-crack hotspots exhibits an increase from 260 to 270 to 315–325 m/s when initial temperature increases from 301 to 348 K; and then the threshold velocity decreases to 290–300 m/s with the initial temperature continually increasing to 378 K. The predicted ignition threshold velocity level of the explosives under coupled impact and high temperature loading conditions were consistent with the experimental data.     

基于作战仿真的装甲车辆作战效能评估方法

在研制开发装甲车辆的过程中需要预先知道设计的装备是否满足未来战场需要,主要是它的作战效能是否能满足要求。为了获得研制中装备的作战效能,较好的办法是建立作战模型进行仿真。在仿真结果的基础上,通过选取作战效能评估的主要评价指标,建立装甲车辆作战效能的一个综合评估模型,得到了作战效能。     

C3I系统仿真模型自动生成方法

根据活动模型在C3I系统中应用的广泛性、仿真模型生成的困难性,以及二者之间的相似性,提出一种间接生成Petri网仿真模型的方法,即首先建立活动模型,然后在此基础上生成可执行Petri网模型,从而简化仿真模型的建立过程.还简要介绍二者之间的转换规则,并给出应用实例.     

用Matlab实现减摇鳍模糊控制器仿真

基于Conolly理论建立了船舶模型,以横摇角和横摇角速度为输入量,鳍角为输出量,应用模糊控制理论设计了减摇鳍模糊控制器;利用Matlab的fuzzylogic工具箱针对不同海情对控制器进行了仿真.结果表明,减摇鳍模糊控制器与传统PID控制器相比具有更好的控制效果.